Highlights:
- Improves travel with selectable ride heights
- Pick between 1″, 2.25″, and 3″ ride height settings
- High-strength leaf packs with add-a-leaf kit
- Perfect for Raptors with loaded beds
- Comes with hardware and instructions
- Requires ICON bump stop kit or bump stop spacers
Replacement Leaf Springs with Three Ride Height and Spring Rate Settings
While the factory rear leaf springs of the 2017-2020 Raptors do their jobs adequately, they don’t have the type of travel that hardcore off-roaders need. The problem is that most aftermarket leaf packs end up hurting you when traveling loaded or when your Raptor is decked out with chase racks, bed cages, drawer systems, and other bed-mounted hardware that puts weight in the bed. That’s where ICON’s Multi-Rate Rear Leaf Springs for the 2017-2020 Raptors come in. This pair of leaf packs comes with a removable add-a-leaf which allows you to choose three different ride height settings to compensate for different amounts of load in your Raptor’s bed so that you don’t end up with a leaf pack that causes a ton of rear sag and leaves your Raptor nose-high. The leaf pack can add +1.00″, +2.25″, or +3.00″ of rear ride height on an unloaded rear end and comes with everything you need to get them installed on your Raptor.
Extremely Strong and Durable Leaf Springs with Excellent Ride Quality and Travel
ICON’s Multi-Rate Leaf Springs were designed for an excellent fit on your Raptor while being backed by ICON quality that you can count on in even the most extreme conditions and terrain. Each spring in the leaf packs is made out of extremely strong spring steel, and each pack features a triple military wrap front eyelet and half-wrap rear eyelet that provide excellent durability and reliability. The leaf packs include specially-designed rebound springs reduces the chances of axle wrap and limits the severity of any axle wrap that you may encounter. Each spring in the Multi-Rate Leaf Packs comes with leaf separators and tip inserts to reduce noise during operation. The Multi-Rate Leaf Springs install right into place of your Raptor’s stock leaf springs with only minimal amounts of hardware trimming for proper fitment. ICON includes installation hardware and install instructions.
Ride Height Settings:
- +1.00″ over Stock: use leaf packs out of the box without additional add-a-leaf
- +2.25″ over Stock: use add-a-leafs in place of the #3 leaf. +20% spring rate. +1.00″ height with 400lbs of load.
- +3.00″ over Stock: use add-a-leafs in #3 position with all other leaf springs. +40% spring rate. +.50″ height with 850lbs of load
Requires ICON Hydraulic Bump Stop Kit or Bump Stop Spacers: these leaf springs are ideally meant to be used with ICON’s Hydraulic Bump Stop Kit. If your Raptor is not equipped with a bump stop kit, ICON’s Rear Bump Stop Spacers will be required for installation.
Some Trimming Required: these leaf springs require trimming of some of your Raptor’s factory hardware for proper installation.
